Ultra Clear Bond
XCEL UCB is a transparent MS Polymer adhesive sealant. It’s designed for performance excellence, and is perfect for transparent applications. It has a high tensile strength of 22 kg per square centimetre. It’s 100% solvent free, odourless and environmentally friendly.
Technical Information
| Raw material basis: | MS Polymer |
| Consistency: | Non-slump paste |
| Specific gravity: | approx. 1.05 g/ml |
| Skin forming time: | 15 – 20 minutes (at 23ºC; 50% R.H.) |
| Curing rate: | 4 mm/24 hr |
| Resistance to flow (ISO 7390): | approx. 0 mm |
| Consumption: approx. | 50 ml/ linear meter (nozzle diameter: 8mm) |
| Application temperature: | Between 5ºC to 40 ºC |
| Properties of the cured product: | (After one week at 23ºC and 50% R.H.) |
| Service temperature: | -40ºC to +90ºC |
| Shore A hardness (ISO 868): | 35 |
| Modulus – elongation at 100% – (ISO 37): | 0,8 Mpa. |
| Max. tensile (ISO 37): | 1.7 MPa. |
| Elongation at break (ISO 37): | > 150 % |
These values may vary depending on environmental factors such as temperature, moisture, and type of substrates. The time until complete curing may be extended at lower temperature, lower humidity or increasing film thickness.
UCB is a 1-component, permanently elastic, fast curing adhesive /sealant, based on MS Polymer, for indoor and outdoor applications, this product is completely clear when cured.
 |
UCB – Clear |
12 tubes per box
104 Boxes per skid
