Universal Bond & Seal

XCEL UBS is the ultimate MS Polymer adhesive sealant, chosen by professionals and DIY users. Designed for performance excellence, it bonds, seals and mounts, even underwater, and has a high tensile strength of 27kg per square centimetre. It is U.V. and weather resistant, and impedes fungal and bacterial growth. It doesn’t contain any solvents or isocyanates. It’s odourless, and can be painted. It cures without shrinking, resists vibrations and remains flexible. And it offers unique adhesion on virtually any material in most applications, even without fixings. It’s 100% solvent free, environmentally friendly, and it comes in 8 different colours.

Permanently flexible
Resists Vibrations
Adheres to wet and dry surfaces
Suitable for indoors and outdoors
Paintable

Odourless
High UV and Fungus Resistance
Fast curing
Cures shrink free
High adhesive strength

Raw material basis:	MS Polymer
Consistency:	Non-slump paste
Specific gravity:	approx. 1.58 g/ml
Skin forming time:	15 – 20 minutes (at 23ºC; 50% R.H.)
Curing rate:	2-3 mm/24 hr
Resistance to flow (ISO 7390):	approx. 0 mm
Consumption:	approx. 50 ml/ linear meter (nozzle diameter: 8mm)
Application temperature:	Between -18ºC to 60ºC
Properties of the cured product:	(After one week at 23ºC and 50% R.H.)
Service temperature:	-40ºC to +90ºC
Shore A hardness (ISO 868):	58
Modulus – elongation at 100% – (ISO 37):	1,70 Mpa.
Max. tensile (ISO 37):	2,20 MPa.
Elongation at break (ISO 37):	> 200 %

These values may vary depending on environmental factors such as temperature, moisture, and type of substrates. The time until complete curing may be extended at lower temperature, lower humidity or increasing film thickness.

Overview

UBS is available in 5 standard colours two of which we carry in stock, white and grey. Any other colour can be manufactured with a minimum order qty of over 1248 cartridges.